Delta C2000 Series User Manual page 181

Chapter 10 Digital Keypad C2000 Series
Display Icon
Display item
1. Parameter Setup
2. Copy Parameter
Press ENTER key to go to 001~004:
content storage
For example: Setup source of master frequency command.
Once in the Group 00 Motor Drive Parameter,
Use Up/Down key to select parameter 20:
Auto Frequency Command.
When this parameter is selected, press
ENTER key to go to this parameter's setting
menu.
Use Up/Down key to choose a setting.
For example: Choose "2 Analogue Input, then
press the ENTER key.
After pressing the ENTER key, an END will be
displayed which means that the parameter
setting is done.
4 duplicates are provided
The steps are shown in the example below.
Example: Saved in the motor drive.
1 Go to Copy Parameter
2 Select the parameter group which needs to
be copied and press ENTER key.
1 Select 1: Save in the motor drive.
2. Press ENTER key to go to "Save in the
motor drive" screen.
10-6