Delta C2000 Series User Manual page 206

3)
Edit Main Page
1. On the bottom right-hand corner of the HMI, click on a page number to edit or go to VIEW >HMI page to start
editing main page. As shown in the image, the following objects are available. From left to right: Static Text,
ASCII Display, Static Bitmap, Scale, Bar Graph, Button, Clock Display, Multi-state bit map, Units, Numeric
Input and 11 geometric bitmaps and lines of different width. The application of Static Text, Static Bitmap, and
geometric bitmap is the same as the editing startup page.
2. Numric/ASCII Display : To add a Numeric/ASCII Display object to a screen, double click on the object to set up
Related Devices, Frame Setting , Fonts and Alignment.
Related Device: Choose the VFD Communication Port that you need, if you want to read output
frequency (H), set the VFD Communication Port to $2202. For other values, please refer to ACMD
ModBus Comm Address List.
3. Scale Setting : On the Tool Bar, click on this
Property Window on the right hand side of your computer screen.
Chapter 10 Digital Keypad
for Scale Setting. You can also edit Scale Setting in the
10-31
C2000