Hardware Configuration Tool For As Series Modules - Hwconfig; Introduction Of The Hwconfig Environment - Delta AS Series Operation Manual

Send Quote Requests to info@automatedpt.com Call +1(800)985-6929 To Order or Order Online At Deltaacdrives.com
8.1 Hardware Configuration Tool for AS Series Modules -
HWCONFIG
This section uses ISPSoft for demonstration. For DIADesigner operation, refer to Chapter 6 from DIADesigner
software manual.
HWCONFIG is a built-in hardware configuration tool in ISPSoft. You can configure CPU and module parameters,
download/upload parameters, detect a hardware configuration online, and make a diagnosis through HWCONFIG.
The examples used below are from HWCONFIG 4.0 (ISPSoft V3.11). Refer to previous versions of ISPSoft Manual or
AS Series Operation Manual for the operation examples on the previous versions of HWCONFIG.
You must download all parameters set in HWCONFIG to the CPU module for them to take effect.
The data exchange area set in HWCONFIG for modules cannot be used repeatedly for other communication
data and vise versa.

8.1.1 Introduction of the HWCONFIG Environment

In ISPSoft, double-click HWCONFIG in the project management area to start HWCONFIG.
Send Quote Requests to info@automatedpt.com
Call +1(800)985-6929 To Order or Order Online At Deltaacdrives.com