Panasonic FP-E Programming Manual page 816

High−level Instructions
Flag conditions
・Error flag (R9007):
・Error flag (R9008):
3 − 552
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
− Turns on when the area is exceeded when an index modifier is used.
− Turns on when the "n" is other than 0.
− Turns on when the data "S, S+1 to S+!0, S+11" of data table are outside
specification range.
− Turns on when the composite speed designation satisfies:
Maximum speed "S+4, S+5" > 50kHz
− Turns on when increment mode is designated and the value of "current
value + movement distance" is outside the range −8388608 to +8388607.
− Turns on when absolute mode is designated and the target value is outside
the range −8388608 to +8388607.
− The acceleration time and deceleration time has not been set to the same
value.
FP0R