Panasonic FP-E Programming Manual page 729

FP0R
Possible specification range for "Yn": Devices specified for the match ON/OFF output
Type Device area
FP0R Y0 to Y1F
Example of target value match on setting
When specifying the high−speed counter
Condition
(1) Specify the high−speed counter channle number 0.
(2) Set the target value to 10000.
(3) Set the output coil to be turned off when the values match to Y2.
R0
( DF )
F166 HC1S, H0, K10000, Y2
Execution of program
Target value
10000
0
R0
Control flag
R9110
Y2
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
However, for the device that is not implemented, only the memory turns ON/OFF.
Elapsed value
End of F166 control (clear)
The number of the high−speed counter control flag varies
depending on the channel used.
Regarding the channel number and control flag for each
model, refer to the table on the next page.
Targe value match ON
High−speed counter control start
High−level Instructions
3 − 465