Panasonic FP-E Programming Manual page 679

Flag conditions
・Error flag (R9007):
・Error flag (R9008):
Data configuration for the internal calendar timer
FP0R/FPΣ
/FP−X/FP2/FP2SH/FP10SH
DT90056
Years Months
Precautions during programming
The special data registers DT9054 to DT9056/ DT90054 to DT90056, in which the values of the internal
calendar timer are stored, cannot be specified directly for D. To change the value of the internal calendar
timer, store the addition results in a separate memory area, and then use the F0 (MV) instruction to transfer
the value to DT9054 to DT9056/DT90054 to DT90056.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Turns on and stays on when:
Turns on for an instant when:
− The area specified using the index modifier exceeds the limit.
− The data specified by S1 and S2 is not BCD data.
− The data specified by S1 is not the date/clock data.
− The data specified by S2 is not the time data.
− The specified data exceeds the area.
DT90055
Days Hours
High−level Instructions
DT90054
Minutes Seconds
3 − 415