Panasonic FP-E Programming Manual page 620

High−level Instructions
(1) Specifying word unit transmission
If word unit transmission is being used, the data for the specified number of words is sent from the memory
area of the local station specified by S2, and is stored starting from the beginning of the memory area of the
remote station specified by D and N.
If only the MEWNET−H network is being used, up to 1,020 words can be sent at one time, and if the network is
using the MEWNET−P and MEWNET−W, up to 16 words can be sent at one time.
15 11
S1:
Number of transmission words: H001 to H3FC (1 to 1020)
Example:
If 10 words of data are being sent, K10(H000A) should be
specified in S1.
(2) Specifying bit unit transmission
If bit unit transmission is being used, the information of the specified bit in the memory area of the local station
specified by S2 is sent to the specified bit of the memory area of the remote station specified by D and N.
15 11
S1:
Example:
If the data of Bit No. 15 of the local station memory area is
being sent to Bit No. 0 of the memory area in the remote
station, H800F should be specified in S1.
(3) Specifying the remote station (common to both word/bit transmission)
Specifying the route No. and depth
1
S1+1:
3 − 356
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
7 4
Specifies H0
7 4
Bit No. of local station's memory area: H0 to HF(0 to 15)
Specifies H0
Bit No. of remote station's memory area: H0 to HF(0 to 15)
Specifies H8
Depth of remote station: H01 to H03
Route No. of local station: H1 to H8
Specifies H8.
0
0