Panasonic FP-E Programming Manual page 1275

FP2/FP2SH/FP3/FP10SH (A: Available, N/A: Not available)
Address
FP2/
FP3 FP2SH
FP10SH
DT9132 DT90132
DT9133 DT90133
DT9134 DT90134
DT9135 DT90135
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Name
The bit corresponding to the station
number of the MEWNET-F where an
MEWNET-F
error is occurring is set to on. Monitor
(remote I/O) error
using binary display.
slave station
(1: Error slave station, 0: Normal slave
number – current
station)
condition
(when DT9131/
DT90131 is H0,
H1, H2 or H3)
When the installed condition of a
MEWNET-F slave station set unit has
changed since the power was turned
MEWNET-F
on, the bit corresponding to that slave
(remote I/O) I/O
station number will be set to on.
verify error slave
Monitor using ibnary display.
station number
(1: Error slave station, 0: Normal slave
(when DT9131/
station)
DT90131 is H100,
H101, H102 or
H103)
The bit corresponding to the slave
station number of the MEWNET-F
where an error is occurring will be set
MEWNET-F
to on. Monitor using binary display.
(remote I/O) error
slave station (1: Error slave station, 0: Normal slave
number – record station)
(when DT9131/
DT90131 is H0,
H1, H2 or H3)
If a momentary voltage drop at
MEWNET-F slave station set, the bit
MEWNET-F
corresponding to that slave station
(remote I/O)
number will be set to on. Monitor using
momentary
binary display.
voltage drop slave
(1: Error slave station, 0: Normal slave
station number
station)
(when DT9131/
DT90131 is H100,
H101, H102 or
H103)
Descriptions
Read Writ-
-ing ing
A N/A
5-187