Panasonic FP-E Programming Manual page 1123

FP-e
Relay No.
R9030 Not used
R9031 Not used
R9032 Not used
Print instruction
R9033
execution flag
RUN overwrite
R9034
complete flag
R9035 Not used
R9036 Not used
COM port
R9037 communication error
flag
COM port reception
done flag during
R9038
general-purpose serial
communication
COM port
transmission done
R9039 flag during general-
purpose serial
communication
High-speed
R903A counter control
flag
High-speed
R903B counter control
flag
High-speed
R903C counter control
flag
High-speed
R903D counter control
flag
R903E
R903F
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Name
-
-
-
Off: Printing is not executed.
On: Execution is in progress.
Goes on for ony the first scan following completion of a
rewrite during RUN operation.
-
-
Goes on is a transmission error occurs during data
-
communication.
Turns on when the terminator is received during general -
-
purpose serial communication.
Goes on when transmission has been completed in
-
general-purpose serial communication.
Goes off when transmission is requested in general-
-
purpose serial communication.
Turns on while the high-speed counter instructions
ch0 F166(HC15), F167(HC1R) and the pulse output instructions
F168(SPD1) to F170(PWM) are executed.
Turns on while the high-speed counter instructions
ch1 F166(HC15), F167(HC1R) and the pulse output instructions
F168(SPD1) to F170(PWM) are executed.
Turns on while the high-speed counter instructions
ch2 F166(HC15), F167(HC1R) and the pulse output instructions
F168(SPD1) to F170(PWM) are executed.
Turns on while the high-speed counter instructions
ch3 F166(HC15), F167(HC1R) and the pulse output instructions
F168(SPD1) to F170(PWM) are executed.
-
-
Description
5-35