Panasonic FP-E Programming Manual page 1247

FP2/FP2SH/FP10SH
Add-
Item
ress
29
30
31
Time
setting
for
FP2SH/
FP10SH
32
33
34
31
Time 32
setting
for FP2
33
34
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Name
Operation time setting for
communication
processing
Time-out time setting of
system watching dog
timer
Multi-frame
communication time
settings in the computer
link and communication
time setting for data
sending buffer
Time-out time setting for
the F145 (SEND)/P145
(PSEND), F146
(RECV)/P146 (PRECV),
F152 (RMRD)/P152
(PRMRD) and F153
(RMWT)/P153 (PRMWT)
instructions
Effective time setting for
monitoring
Constant scan time
setting
Multi-frame
communication time
settings in the computer
link
Time-out time setting for
the F145 (SEND)/P145
(PSEND), F146
(RECV)/P146 (PRECV),
F152 (RMRD)/P152
(PRMRD) and F153
(RMWT)/P153 (PRMWT)
instructions
Program block-editing
time in the RUN mode
Constant scan time
setting
Default
value
0 to 52428 μs
If the response of the connected
240 μs
programmable display is show, please
make the value bigger.
100 ms 0.4 to 640 ms
6500 ms 10 to 81917.5 ms
10000 ms 10 to 81917.5 ms
163837.5
2500 to 163837.5 ms
ms
0 to 640 ms:
Scans once each specified time
0 ms: interval.
Normal Set "0": Normal scan
scan Setting time can be obtained using the
formula
"Set time" = "Set value" x 0.1 (ms)
6500 ms 10.0 to 8190.0 ms
2000 ms 10.0 to 8190.0 ms
10000 μs 800.0 to 52428.0 μs
0 to 640 ms:
0 :
Scans once each specified time
Normal
interval.
scan
Set "0": Normal scan
Descriptions
5-159