Panasonic FP-E Programming Manual page 1186

(A: Available, N/A: Not available)
Register
No.
Real-Time Clock
DT90058 (Clock/Calendar) time
setting
Serial communication
DT90059
error code
5-98
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Name
The Real-Time Clock(Clock/Calendar) is
adjusted as follows.
When setting the Real-Time
Clock(Clock/Calendar) by program
By setting the highest bit of DT90058 to 1, the
time becomes that written to DT90054 to
DT90057 by F0 (MV) instruction. After the
time is set, DT90058 is cleared to 0. (Cannot
be performed with any instruction other than
F0 (MV) instruction.)
<Example>
Set the time to 12:00:00 on the 5
the X0 turns on.
Note) If the values of DT90054 to DT90057
are changed with the programming tool
software, the time will be set when the new
values are written. Therefore, it is
unnecessary to write to DT90058.
Error code is sotred here when a
communication error occurs.
Descriptions
th
day when
Read- Writ-
ing ing
A A
N/A N/A