Panasonic FP-E Programming Manual page 844

High−level Instructions
Description
Performs AND operation on each bit in the 32-bit equivalent constant or 32-bit data specified by "S1+1 and
S1" and "S2+1 and S2" when the trigger turns on. The AND operation result is stored in the 32-bit area
specified by D.
Flag conditions
・Error flag (R9007):
・Error flag (R9008):
・= flag (R900B):
3 − 580
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Turns on and stays on when the area specified using the index modifier
exceeds the limit.
Turns on for an instant when the area specified using the index modifier
exceeds the limit.
Turns on for an instant when the calculated result is recognized as "0".