Panasonic FP-E Programming Manual page 1115

Address
FP0 C10,
FP0 T32 C14, C16,
C32, SL1
DT90104 DT9104
DT90105 DT9105
DT90106 DT9106
DT90107 DT9107
DT90108 DT9108
DT90109 DT9109
DT90110 DT9110
DT90111 DT9111
Note1) In the FP0 compatibility mode of FP0R, it is 32-bit data.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Name
High-speed counter
elapsed value area for
ch2 (*Note1)
High-speed counter
target value area for
ch2 (*Note1)
High-speed counter
elapsed value area for
ch3 (*Note1)
High-speed counter
target value area for
ch3 (*Note1)
Descriptions
The elapsed value (24-bit data) for the high-
speed counter is stored here. Each time the ED
instruction is executed, the elapsed value for the
high-speed counter is automatically transferred
to the special registers DT9104 and
DT9015/DT90104 and DT90105.
The value can be written by executing a DMV
(F1) instruciton.
The target value (24-bit data) of the high-speed
counter specified by the high-speed counter
instruction is stored here.
Target values have been preset for the various
instructions, to be used when the high-speed
counter related instruction F166 to F170 is
executed. These preset values can only be read,
and cannot be written.
The elapsed value (24-bit data) of the high-
speed counter is stored here. Each time the ED
instruction is executed, the elapsed value for the
high-speed counter is automatically transferred
to the special registers DT9108 and
DT9109/DT90108 and DT90109.
The value can be written by executing a DMV
(F1) instruction.
The target value (24-bit data) of the high-speed
counter specified by the high-speed counter
instruction is stored here.
Target values have been preset for the various
instructions, to be used when the high-speed
counter related instruction F166 to F170 is
executed. These preset values can only be read,
and cannot be written.
5-27