Panasonic FP-E Programming Manual page 1055

4.1 Changing the Set Value of Timer/Counter During RUN
4.1.1 Method of Rewriting Constant in the Program
Timer set value
X0
TMX5, K 30
T5 Y10
Changing the set values (constants) in the program
Constants in the program can be rewritten as long as the following conditions are
observed.
Operation method:
Rewriting method:
Rewrite method using the programming tool software
Example of changing the set value of timer 5 from K30 to K50
1. Place the cursor on the value of K30 set for the timer 0.
2. Press the "Delete" key of computer to clear the value.
3. Enter a new constant of K50, and press the "Enter" key.
Rewrite method using FP programmer II
Example of changing the set value of timer 5 from K30 to K50
1. Read the address containing the timer instruction.
SHIFT TM ST
SC T-SV X-WX
2. Clear the constant (K30).
(HELP)
CLR
3. Enter the new constant (K50).
(BIN)
5 0
K/H
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
4.1
This method rewrites the
value in the program.
RAM operation only
Method using the programming tool software
Method using the FP Programmer II
SRC READ READ
5
WRT
Changing the Set Value of Timer/Counter During RUN
4 - 3