Panasonic FP-E Programming Manual page 1175

WR903
Relay No.
R9030 Not used
R9031 Not used
COM1 port
R9032 communication mode
flag
Print instruction
R9033
execution flag
RUN overwrite complete
R9034
flag
R9035 Not used
R9036 Not used
COM1 port
R9037 communication error
flag
COM1 port reception
R9038 done flag during general
purpose communication
COM1 port transmission
done flag during
R9039
general-purpose serial
communication
High-speed
R903A counter control
flag
High-speed
R903B counter control
flag
High-speed
R903C counter control
flag
High-speed
R903D counter control
flag
TOOL port reception
R903E done flag during general
purpose communication
TOOL port transmission
done flag during
R903F
general-purpose serial
communication
Note) R9030 to R9030F can be changed during 1 scan.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Name
-
-
Turns on when the general-purpose communication
-
function is being used
Goes off when the MEWTOCOL-COM or the PLC link
-
function is being used.
Off: Printing is not executed.
On: Execution is in progress.
Goes on for ony the first scan following completion of a
rewrite during the RUN operation.
-
-
Goes on is a transmission error occurs during data
-
communication.
Goes off when a request is made to send data, using the
-
F159 (MTRN) instruction.
Turns on when the terminator is received during general -
-
purpose serial communication.
Goes on when transmission has been completed in
-
general-purpose serial communication.
Goes off when transmission is requested in general-
-
purpose serial communication.
Turn on while the high-speed counter instructions
ch0 F166(HC15), F167(HC1R) and the pulse output instructions
F171(SPDH) to F176(PWMH) are executed.
Turn on while the high-speed counter instructions
ch1 F166(HC15), F167(HC1R) and the pulse output instructions
F171(SPDH) to F176(PWMH) are executed.
Turn on while the high-speed counter instructions
ch2 F166(HC15), F167(HC1R) and the pulse output instructions
F171(SPDH) to F176(PWMH) are executed.
Turn on while the high-speed counter instructions
ch3 F166(HC15), F167(HC1R) and the pulse output instructions
F171(SPDH) to F176(PWMH) are executed.
Turns on when the terminator is received during general -
-
purpose serial communication.
Goes on when transmission has been completed in
-
general-purpose serial communication.
Goes off when transmission is requested in general-
-
purpose serial communication.
Description
5-87