Panasonic FP-E Programming Manual page 673

F155
(SMPL)
P155
(PSMPL)
Outline Starts sampling data which is preset in trace memory.
Program example
Trigger
R10
F155 SMPL
10
Explanation of example
When the execution condition (trigger) R10 turns on, sampling of a relay (contact) and register registered in
advance is carried out.
on
R10
off
on
Sampling off
Sample
off
Registration of the data to be sampled, specification of the sampling method (such as the cable and the time
interval), and specification of the sampling trace can be done using only the programming tool software.
Description
During a sampling trace, sampling of the specified data (relay contacts and registers) is carried out, and the
data contents at the time of sampling are stored in the sampling trace memory.
If the sampling trace settings and the startup have not been specified using the programming tool software,
processing will not be carried out, even if the execution condition (trigger) is fulfilled.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Sampling start
Ladder Diagram Ladder Diagram
on on off
High−level Instructions
Availability
FP2/FP2SH/FP10SH
FP−X (V2.00 or more)
FPΣ (V3.10 or more)/FP0R
Boolean
Address Instruction
10 ST R 10
11 F155 (SMPL)
3 − 409