Panasonic FP-E Programming Manual page 840

High−level Instructions
Explanation of example
When trigger R0 turns on,
− the contents of data register DT10 are copied to DT40.
− the contents of data register DT20 are copied to DT41.
− the contents of data register DT30 are copied to DT42.
[S3]16 bits [S2]16 bits
Contents of DT30 Contents of DT20
[D]
DT42
Description
The 16-bit data or 16-bit equivalent constant specified by S1, S2 and S3 is copied to the area (3 words)
specified by D when the trigger turns on.
Related instruction
To transfer two types of 16-bit data at once, use the F7 (MV2) instruction.
Flag conditions
・Error flag (R9007):
・Error flag (R9008):
3 − 576
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
[S1]16 bits
Contents of DT10
DT41 DT40
Turns on and stays on when the area specified using the index modifier
exceeds the limit.
Turns on for an instant when the area specified using the index modifier
exceeds the limit.