Panasonic FP-E Programming Manual page 675

F156
(STRG)
P156
(PSTRG)
Outline Stops sampling data.
Program example
Trigger
R10
10 F156 STRG
Explanation of example
When the execution condition (trigger) R10 turns on, a sampling trace stop command trigger is applied.
on
R10
off
on
Sampling
off
Stop command trigger
Registration of the data to be sampled, specification of the sampling method (such as the cable and the time
interval), and specification of the sampling trace can be done using only the programming tool software.
Description
This instruction applies a sampling trace stop command trigger. When a trigger is applied, sampling of the
specified delay is carried out, and then sampling trace stops.
If the sampling trace settings and the startup have not been specified using the programming tool software,
processing will not be carried out, even if the execution condition (trigger) is fulfilled.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Sampling stop
Ladder Diagram Ladder Diagram
Delay times
Sampling trace stops
High−level Instructions
Availability
FP2/FP2SH/FP10SH
FP−X (V2.00 or more)
FPΣ (V3.10 or more)/FP0R
Boolean
Address Instruction
10 ST R 10
11 F156 (STRG)
3 − 411