Panasonic FP-E Programming Manual page 854

High−level Instructions
Description
1) Conversion to the number of seconds from standard time *1 is performed for the input time data [S ~
S+2], and a conversion result is stored in [D, D+1] by the 32−bit binary.
2) The conversion is in consideration of the leap year.
1 minute
1 hour
1 day
1 year (leap year)
1 year (except a leap year)
A leap year (4 multiple years)
3) Time data (S) must be specified in the data sequence of BCD, and the value within the limits must be
registered.
*1: Standard time is 00:00'00" on January 1, '01.
Moreover, a conversion result is output with a binary value.
(higher)
Minutes (H00−59)
S:
Days (H01−H31)
S+1:
Years (H00−H99)
S+2:
D:
(H00000000 − HBC19137F)
D+1:
The correspondence table of Time data and Second conversion
Time data (S)
'01/01/01 00:00:00
2001
'01/01/01 00:00:01
:
:
:
'01/01/01 00:01:00
:
:
:
'01/01/01 01:00:00
:
:
:
'01/01/02 00:00:00
:
:
:
'99/12/31 23:59:59
2099
'00/01/01 00:00:00
2100
:
:
'00/12/31 23:59:59
2100
Flag conditions
Σ Error flag (R9007) (R9008):
3 − 590
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
−−− 60 seconds
−−− 60 minutes
−−− 24 hours
−−− 366 days
−−− 365 days
−−− Feb.29
Time data (S) (BCD)
(lower)
Seconds (H00−H59)
Hours (H00−H23)
Months (H01−H12)
Second data (D)
Seconds data
Seconds data (D)
H00000000
H00000001
:
H0000003C
:
H00000E10
:
H00015180
:
HBA368E7F
HBA368E80
:
HBC19137F
− It turns on, when the specified address using the index modifier exceeds a limit.
− It turns on, when values other than BCD are specified for [S].
− It turns on, when the value which exceeds the range in the time data of [S]
is specified.
− It turns on, when the data of [S] exceeds the area.