Panasonic FP-E Programming Manual page 1152

Address
Clock/calender
DT90053 monitor (hour/minute)
(T32 only)
Clock/calender setting
DT90054 (minute/second)
(T32 only)
Clock/calender setting
DT90055 (day/hour)
(T32 only)
Clock/calender setting
DT90056 (year/month)
(T32 only)
Clock/calender setting
DT90057 (day-of-the-week)
(T32 only)
5-64
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Name
Hour and minute data of the clock/calender
are stored here. This data is read-only data. It
cannot be overwritten.
The year, month, day, hour, minute, second
and day-of-the-week data for the
clock/calender is stored. The built-in
clock/calender will operate correctly through
the year 2099 and supports leap years. The
clock/calender can be set by writing a value
using a programming tool software or a
program that uses the F0 (MV) instruction.(see
example for DT90058)
As a day of the week is not automatially set on
FPWIN GR, fix what day is set to 00, and set
each value for 00 to 06.
FP0R (A: Available, N/A: Not available)
Description
Read- Writ-
ing ing
A N/A
A A