Panasonic FP-E Programming Manual page 884

High−level Instructions
Description
The character string specified for "S1" is coupled to that specified for "S2", and the result is stored in the
character string specified by "D".
At the starting address of the area for storing results "D", designate the character string size using the user
program.
Explanation of example
10
DT0
5
DT1
"A"
"B"
DT2
"C"
DT3 "D"
"E"
DT4
DT5
DT6
Higher
Lower
16 bits 16 bits
10
DT20
8
DT21
"A"
"B"
DT22
=
"C"
"D"
DT23
"E"
"1"
DT24
"3"
DT25 "2"
DT26
Higher Lower
16 bits 16 bits
Precautions during programming
If the result of the coupling operation is larger than the character string size of "D", only as many characters as
will fit in "D" are stored.
Flag conditions
・Error flag (R9007):
・Error flag (R9008):
・Carry flag (R9009): Turns on for an instant when the operation result is larger than the character
3 − 620
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
10
DT10
3
DT11
"1"
"2"
DT12
+
"3"
DT13
DT14
DT15
DT16
Higher Lower
16 bits 16 bits
Designate with the user program
Area where operation results are stored
Turns on and stays on when:
Turns on for an instant when:
− The specified range is exceeded when an index is modified.
− The number of characters is larger than the character string size.
string size of "D"