Panasonic FP-E Programming Manual page 1215

WR908 FP-X
Address
R9080
R9081
R9082
R9083
R9084
R9085
R9086
MEWNET-W0
R9087
PC(PLC) link 1
transmission
assurance
R9088
relay
R9089
R908A
R908B
R908C
R908D
R908E
R908F
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Name
Turns on when Unit No. 1 is communicating properly in
Unit
PC(PLC) link mode. Turns off when operation is stopped,
No.1
when an error occurs, or when not in the PC(PLC) link mode.
Turns on when Unit No. 2 is communicating properly in
Unit
PC(PLC) link mode. Turns off when operation is stopped,
No.2
when an error occurs, or when not in the PC(PLC) link mode.
Turns on when Unit No. 3 is communicating properly in
Unit
PC(PLC) link mode. Turns off when operation is stopped,
No.3
when an error occurs, or when not in the PC(PLC) link mode.
Turns on when Unit No. 4 is communicating properly in
Unit
PC(PLC) link mode. Turns off when operation is stopped,
No.4
when an error occurs, or when not in the PC(PLC) link mode.
Turns on when Unit No. 5 is communicating properly in
Unit
PC(PLC) link mode. Turns off when operation is stopped,
No.5
when an error occurs, or when not in the PC(PLC) link mode.
Turns on when Unit No. 6 is communicating properly in PLC
Unit
link mode. Turns off when operation is stopped, when an error
No.6
occurs, or when not in the PLC link mode.
Turns on when Unit No. 7 is communicating properly in
Unit
PC(PLC) link mode. Turns off when operation is stopped,
No.7
when an error occurs, or when not in the PC(PLC) link mode.
Turns on when Unit No. 8 is communicating properly in
Unit
PC(PLC) link mode. Turns off when operation is stopped,
No.8
when an error occurs, or when not in the PC(PLC) link mode.
Turns on when Unit No. 9 is communicating properly in
Unit
PC(PLC) link mode. Turns off when operation is stopped,
No.9
when an error occurs, or when not in the PC(PLC) link mode.
Turns on when Unit No. 10 is communicating properly in
Unit
PC(PLC) link mode. Turns off when operation is stopped,
No.10
when an error occurs, or when not in the PC(PLC) link mode.
Turns on when Unit No. 11 is communicating properly in
Unit
PC(PLC) link mode. Turns off when operation is stopped,
No.11
when an error occurs, or when not in the PC(PLC) link mode.
Turns on when Unit No. 12 is communicating properly in
Unit
PC(PLC) link mode. Turns off when operation is stopped,
No.12
when an error occurs, or when not in the PC(PLC) link mode.
Turns on when Unit No. 13 is communicating properly in
Unit
PC(PLC) link mode. Turns off when operation is stopped,
No.13
when an error occurs, or when not in the PC(PLC) link mode.
Turns on when Unit No. 14 is communicating properly in
Unit
PC(PLC) link mode. Turns off when operation is stopped,
No.14
when an error occurs, or when not in the PC(PLC) link mode.
Turns on when Unit No. 15 is communicating properly in
Unit
PC(PLC) link mode. Turns off when operation is stopped,
No.15
when an error occurs, or when not in the PC(PLC) link mode.
Turns on when Unit No. 16 is communicating properly in
Unit
PC(PLC) link mode. Turns off when operation is stopped,
No.16
when an error occurs, or when not in the PC(PLC) link mode.
Description
5-127