Panasonic FP-E Programming Manual page 1110

Address
FP0 C10,
FP0 T32 C14, C16,
C32, SL1
DT90038 DT9038
DT90039 DT9039
to to
DT90043 DT9043
DT90044 DT9044
DT90045 DT9045
DT90046 DT9046
DT90047 DT9047
DT90048 DT9048
DT90049 DT9049
DT90050 DT9050
DT90051 DT9051
Note1) In the FP0 compatibility mode of FP0R, it is 32-bit data.
5-22
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Name
Work 2 for F96 (SRC)
instruction
Not used
High-speed counter
elapsed value for ch0
(*Note1)
High-speed counter
target value for ch0
(*Note1)
High-speed counter
elapsed value area for
ch1 (*Note1)
High-speed counter
target value area for
ch1 (*Note1)
Descriptions
The position of the first matching data, counting
from the starting 16-bit area, is stored here when
an F96 (SRC) instruction is executed.
-
The elapsed value (24-bit data) for the high-
speed counter is stored here. Each time the ED
instruction is executed, the elapsed value for the
high-speed counter is automatically transferred
to the special registers DT9044 and
DT9045/DT90044 and DT90045.
The value can be written by executing F1 (DMV)
instruction.
The target value (24-bit data) of the high-speed
counter specified by the high-speed counter
instruction is stored here.
Target values have been preset for the various
instructions, to be used when the high-speed
counter related instruction F166 to F170 is
executed. These preset values can only be read,
and cannot be written.
The elapsed value (24-bit data) for the high-
speed counter is stored here. Each time the ED
instruction is executed, the elapsed value for the
high-speed counter is automatically transferred
to the special registers DT9048 and
DT9049/DT90048 and DT90049.
The value can be written by executing F1 (DMV)
instruction.
The target value (24-bit data) of the high-speed
counter specified by the high-speed counter
instruction is stored here.
Target values have been preset for the various
instructions, to be used when the high-speed
counter related instruction F166 to F170 is
executed. These preset values can only be read,
and cannot be written.