Panasonic FP-E Programming Manual page 868

High−level Instructions
Specifying the conversion method [N]
Example of converting 16−bit data (K1234 and K56) to decimal ASCII codes
R1
( DF )
F251 ATOB, F250 BTOA,
Notes
About the digit number of ASCII data
•
When converting 16−bit data to hexadecimal ASCII codes
Specified range: H1 to 4
When less than H4, the specified number of digits is stored
from the lower bytes.
If the digit number of original data is larger with the
specification less than H4, it is an error.
•
When converting 32−bit data to hexadecimal ASCII codes
Specified range: H1 to 8
When less than H8, the specified number of digits is stored
from the lower bytes.
If the digit number of original data is larger with the
specification less than H8, it is an error.
•
When converting to decimal ASCII codes
Specified range: H1 to F
Source data is treated as signed binary data. When it is a
negative number, the minus sign "−" is added.
When the number of digit of ASCII codes is larger than the
converted result, the space "_" is stored in the extra smaller
addresses.
3 − 604
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
M
D−16, DT 10, DT20, DT100 16−D, S2 , H 214 ,
FPΣ/FP−X/FP0R
D