Panasonic FP-E Programming Manual page 1257

FP1/FP-M/FP2/FP2SH/FP10SH/FP3
Address
F152 (RMRD)/P152
(PRMRD) and F153
(RMWT)/P153
(PRMWT) instruction
end flag
R9036
(Available PLC: FP2/
FP2SH/FP3/FP10SH)
I/O link error flag
(Available PLC: FP-M
C20, C23/FP1)
COM port communica-
tion error flag
(Available PLC:
R9037 FP-M C20C, C32C/FP1
C24C, C40C, C56C,
C72C/FP2/FP2SH/
FP10SH)
COM port receive flag
(Available PLC:
FP-M C20C, C32C/FP1
R9038
C24C, C40C, C56C,
C72C/FP2/FP2SH/
FP10SH)
COM port send flag
(Available PLC:
FP-M C20C, C32C/FP1
R9039
C24C, C40C, C56C,
C72C/FP2/FP2SH/
FP10SH)
High-speed counter
control flag (ch0)
R903A
(Available PLC: FP-M
C20, C32/FP1)
Cam control flag
(Available PLC: FP-M/
R903B FP1)
High-speed counter
control flag (ch1)
High-speed counter
R903C
control flag (ch2)
High-speed counter
R903D
control flag (ch3)
R903E Not used
R903F Not used
R9040 Error alarm (0 to 2047)
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Name
Monitors if an abnormality has been detected during the
execution of the F152 (RMRD)/P152 (PRMRD) and F153
(RMWT)/P153 (PRMWT) instructions as follows:
- off: No abnormality detected.
- on: An abnormality detected. (access error)
The error code is stored in:
- FP3: DT9036
- FP2/FP2SH/FP10SH: DT90036
Turns on when the erroro occurs using the I/O link function.
Turns on when the serial data communication error occurs
using COM port.
Turns off when data is being sent by the F144 (TRNS)
instruction.
Turns on when the end code is received during the serial
data communicating.
Turns on while data is not send during the serial data
communicating.
Turns off while data is being sent during the serial data
communicating.
Turns on while the high-speed counter instructions
F166(HC1S) to F170(PWM) are executed.
Turns on while the cam control instruction F165 (CAMO) is
executed.
Turns on while the high-speed counter instructions
F166(HC1S) to F170(PWM) are executed.
Turns on while the high-speed counter instructions
F166(HC1S) to F170(PWM) are executed.
Turns on while the high-speed counter instructions
F166(HC1S) to F170(PWM) are executed.
-
-
Turns on while the error alarm relay (E0 to E2047) acts.
Turns off when the all error alarm relay turns off.
Description
5-169