Panasonic FP-E Programming Manual page 1280

FP2/FP2SH/FP3/FP10SH (A: Available, N/A: Not available)
Address
FP2/
FP3 FP2SH
FP10SH
DT9195 DT90195
DT9196 DT90196
DT9197 DT90197
DT9198 DT90198
DT9199 DT90199
DT9200 DT90200
DT9201 DT90201
DT9202 DT90202
DT9203 DT90203
DT9204 DT90204
DT9205 DT90205
DT9206 DT90206
DT9207 DT90207
DT9208 DT90208
DT9209 DT90209
DT9210 DT90210
DT9211 DT90211
DT9212 DT90212
Note) For MEWNET-W system, available PLC type: FP2/FP2SH/FP3/FP10SH
For MEWNET-P system, available PLC type: FP3/FP10SH
5-192
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Name
MEWNET-H
The link status for the MEWNET-H link is
link status/
monitored as:
link unit
number (H
link 1)
(For FP2/
FPSH, using
W2 mode)
MEWNET-H
The link status for the MEWNET-H link is
link status/
monitored as:
link unit
number (H
link 2)
(For FP2/
FPSH, using
W2 mode)
MEWNET-H
The link status for the MEWNET-H link is
link status/
monitored as:
link unit
number (H
link 3)
(For FP2/
FPSH, using
W2 mode)
Not used
-
Not used
-
Station number, whre the send area address
for the PC link is overlapped with this station,
is stored here.
Test result in the optical transmission path
test mode for MEWNET-P link system is
stored here.
Counts how many times a token is lost.
Counts how many times two or more tokens
MEWNET-
are detected.
W/-P link
status Counts how many times a signal is lost.
[W/P link 2]
Counts how many times a synchronous
(*Note)
abnormality is detected.
Send NACK
Send NACK
Send WACK
Send WACK
Send answer
Send answer
Unidentified command
Descriptions
Read Writ-
-ing ing
A N/A
N/A N/A
A N/A