Delete Snmp User; Show Snmp User - D-Link DES-1210-52/ME Cli Reference Manual

Success.
DES-1210-52/ME:5#

delete snmp user

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete an SNMP user on the Switch:
DES-1210-52/ME:5# delete snmp user dlink v3
Command: delete snmp user dlink v3
Success.
DES-1210-52/ME:5#

show snmp user

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the SNMP users currently configured on the Switch:
DES-1210-52/ME:5# show snmp user
Command: show snmp user
Username
--------------
ReadOnly
ReadOnly
ReadWrite ReadWrite
ReadWrite ReadWrite
DES-1210-52/ME L2 Metro Ethernet Switch CLI Reference Guide
To remove an SNMP user from an SNMP group and also to delete
the associated SNMP group.
delete snmp user <username 32> [v1 | v2c | v3]
The delete snmp user command removes an SNMP user from its
SNMP group and then deletes the associated SNMP group.
<username 32> − A string of up to 32 alphanumeric characters that
identifies the SNMP user to be deleted.
Only administrator, operate or power user-level users can issue this
command.
To display information about each SNMP username in the SNMP
group username table.
show snmp user
The show snmp user command displays information about each
SNMP username in the SNMP group username table.
None.
None.
Group Name SNMP Version
---------------- ----------------
ReadOnly V1
ReadOnly V2
V1
V2
Auth-Protocol
--------------------
None
None
None
None
79
PrivProtocol
---------------
None
None
None
None