System > Port Configuration > Port Media Type; System > Snmp Settings > Snmp Global State; System > Snmp Settings > Snmp User Table - D-Link DGS-1210-12TS/ME User Manual

4 Configuration
Port: Displays the port that has been error disabled.
Port State: Describes the current running state of the port, whether Enabled or Disabled.
Connection Status: This field will read the uplink status of the individual ports, whether Enabled or Disabled.
Reason: Describes the reason why the port has been error-disabled, such as a STP loopback occurrence.
System > Port Configuration > Port Media Type
The Port Media Type page displays the information about the port media type.
Port: Displays the port number.
Type: Displays the port media type. The media types are 1000MBASE-T, 1000MBASE-X, 100MBASE-T,
100MBASE-X, 10MBASE-T and 10MBASE-X.
System > SNMP Settings > SNMP Global State
Simple Network Management Protocol (SNMP) is an OSI Layer 7 (Application Layer) protocol designed
specifically for managing and monitoring network devices. SNMP enables network management stations to
read and modify the settings of gateways, routers, switches, and other network devices. Use SNMP to
configure system features for proper operation, monitor performance and detect potential problems in the
Switch or LAN.
Managed devices that support SNMP include software (referred to as an agent), which runs locally on the
device. A defined set of variables (managed objects) is maintained by the SNMP agent and used to manage
the device. These objects are defined in a Management Information Base (MIB), which provides a standard
presentation of the information controlled by the on-board SNMP agent. SNMP defines both the format of the
MIB specifications and the protocol used to access this information over the network.
The default SNMP global state is disabled. Select Enable and click Apply to enable the SNMP function.
System > SNMP Settings > SNMP User Table
This page is used to maintain the SNMP user table for the use of SNMPv3. SNMPv3 allows or restricts users
using the MIB OID, and also encrypts the SNMP messages sent out between users and Switch.
DGS-1210 series Metro Ethernet Managed Switch User Manual
Figure 4.26 – System > Port Configuration > Port Media Type
Figure 4.27 – System > SNMP Settings > SNMP Global State
3
3
1
1