Allied Telesis CentreCOM FS980M/9 Command Reference Manual page 997

A C
UTHENTICATION OMMANDS
-
AUTH WEB FORWARD
Examples To enable the ARP forwarding feature on interface port1.0.2, use the following
commands:
awplus#
awplus(config)#
awplus(config-if)#
To add the TCP forwarding port 137 on interface port1.0.2, use the following
commands:
awplus#
awplus(config)#
awplus(config-if)#
To add the DNS Server IP address 192.168.1.10 on interface port1.0.2, use the
following commands:
awplus#
awplus(config)#
awplus(config-if)#
awplus(config-if)#
awplus(config-if)#
awplus(config-if)#
To disable the ARP forwarding feature on interface port1.0.2, use the following
commands:
awplus#
awplus(config)#
awplus(config-if)#
To delete the TCP forwarding port 137 on interface port1.0.2, use the following
commands:
awplus#
awplus(config)#
awplus(config-if)#
To delete the all of TCP forwarding on interface port1.0.2, use the following
commands:
awplus#
awplus(config)#
awplus(config-if)#
To enable the arp forwarding feature on authentication profile 'student', use the
commands:
awplus#
awplus(config)#
awplus(config-auth-profile)#
613-50157-01 Rev C
configure terminal
interface port1.0.2
auth-web forward arp
configure terminal
interface port1.0.2
auth-web forward tcp 137
configure terminal
interface port1.0.2
switchport mode access
auth-web enable
auth dynamic-vlan-creation
auth-web forward 192.168.1.10 dns
configure terminal
interface port1.0.2
no auth-web forward arp
configure terminal
interface port1.0.2
no auth-web forward tcp 137
configure terminal
interface port1.0.2
no auth-web forward tcp
configure terminal
auth profile student
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.7-0.x
auth-web forward arp
997