Auth-Web Max-Auth-Fail - Allied Telesis CentreCOM FS980M/9 Command Reference Manual

A C
UTHENTICATION OMMANDS
- - -
AUTH WEB MAX AUTH FAIL

auth-web max-auth-fail

Overview This command sets the number of authentication failures allowed before rejecting
further authentication requests. When the supplicant (client device) fails more
than the specified number of times, then login requests are refused during the
quiet period.
The no variant of this command resets the maximum number of authentication
failures to the default.
auth-web max-auth-fail <0-10>
Syntax
no auth-web max-auth-fail
Default The maximum number of authentication failures is set to 3.
Mode Interface Configuration for a static channel, a dynamic (LACP) channel group, or a
switch port; or Authentication Profile mode.
To set the lock count to 5 on interface port1.0.2, use the following commands:
Examples
awplus#
awplus(config)#
awplus(config-if)#
To set the lock count to the default on interface port1.0.2, use the following
commands:
awplus#
awplus(config)#
awplus(config-if)#
To set the lock count to 5 on authentication profile 'student', use the commands:
awplus#
awplus(config)#
awplus(config-auth-profile)#
To set the lock count to the default on authentication profile 'student', use the
commands:
awplus#
awplus(config)#
awplus(config-auth-profile)#
613-50157-01 Rev C
Parameter
<0-10>
configure terminal
interface port1.0.2
configure terminal
interface port1.0.2
configure terminal
auth profile student
configure terminal
auth profile student
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.7-0.x
Description
The maximum number of authentication requests allowed
before failing.
auth-web max-auth-fail 5
no auth-web max-auth-fail
auth-web max-auth-fail 5
no auth-web max-auth-fail
999