Example: Configuring An Rfc 2544-Based Benchmarking Test For Nni Direction Of Ethernet Pseudowires - Juniper ACX1000 Configuration Manual

Meaning
Related
Documentation
Example: Configuring an RFC 2544-Based Benchmarking Test for NNI Direction of
Ethernet Pseudowires
Requirements
Overview
Copyright © 2017, Juniper Networks, Inc.
results of each category or state of the RFC 2544-based benchmarking test, such as
aborted tests, active tests, and completed tests, for each real-time performance
monitoring (RPM) instance.
The output displays the details of the benchmarking test that was performed. For more
information about the
run show ptp clock
in the
rfc2544-benchmarking
Configuring RFC 2544-Based Benchmarking Tests on page 1341
rfc2544-benchmarking on page 1698
profiles on page 1678
tests on page 1749
show services rpm rfc2544-benchmarking on page 3156
show services rpm rfc2544-benchmarking test-id on page 3161
This example shows how to configure the benchmarking test for a network-to-network
interface (NNI) direction of an Ethernet pseudowire service.
Requirements on page 1367
Overview on page 1367
Configuration on page 1368
Verifying the Results of the Benchmarking Test for NNI Direction of an Ethernet
Pseudowire Service on page 1374
This example uses the following hardware and software components:
An ACX Series router
Junos OS Release 12.3X52 or later
Consider a sample topology in which a router, Router A, functions as an initiator and
terminator of the test frames for an RFC 2544-based benchmarking test. Router A
operates as a provider edge device, PE1, which is connected to a customer edge device,
CE1, on one side and over an Ethernet pseudowire to another router, Router B, which
functions as a reflector to reflect back the test frames it receives from Router A. Router
B operates as a provider edge device, PE2, which is the remote router located at the other
side of the service provider core. The UNI direction of CE1 is connected to the NNI direction
Chapter 37: Configuring RFC 2544-Based Benchmarking Tests
operational command, see
.
CLI Explorer
show services rpm
1367