Juniper ACX1000 Configuration Manual page 942

ACX Series Universal Access Router Configuration Guide
884
Ingress Classification can either be specified as fixed or BA classifiers.
Fixed classification using forwarding classes and BA classification using IPv4 precedence
value are supported.
The following scheduling and queuing properties are supported:
Transmit rate per queue
Shaping rate per queue
WRED
Forwarding classes
Buffer size per queue
Forwarding class to multilink class mapping. You use the
map a forwarding class into a multiclass MLPPP (MCML).
All of the firewall features supported on ACX routers are applicable for MLPPP interfaces
for IPv4 packets
For rewrite rules, IPv4 precedence rule is supported.
The following CoS capabilities are supported on MLPPP interfaces for MPLS packets:
Ingress Classification can either be specified as fixed or BA classifiers. Fixed classification
using forwarding classes and BA classification using EXP bits are supported.
The following scheduling and queuing properties are supported:
Transmit rate per queue
Shaping rate per queue
WRED
Forwarding classes
Buffer size per queue
Forwarding class to multilink class mapping. You use the
map a forwarding class into a multiclass MLPPP (MCML).
All of the firewall features supported on ACX routers are applicable for MLPPP interfaces
for IPv4 packets
For rewrite rules, the EXP rule is supported.
The following example illustrates an MLPPP CoS configuration set:
[edit]
class-of-service {
classifiers {
inet-precedence all-traffic-inet {
forwarding-class assured-forwarding {
loss-priority low code-points 101;
}
forwarding-class expedited-forwarding {
loss-priority low code-points 000;
multilink-class statement to
statement to
multilink-class
Copyright © 2017, Juniper Networks, Inc.