Destination (Interfaces) - Juniper ACX1000 Configuration Manual

destination (Interfaces)

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
Copyright © 2017, Juniper Networks, Inc.
destination address;
[edit interfaces interface-name unit logical-unit-number tunnel],
[edit interfaces interface-name unit logical-unit-number family inet address address],
[edit interfaces interface-name unit logical-unit-number tunnel],
[edit logical-systems logical-system-name interfaces interface-name unit logical-unit-number
family inet address address]
Statement introduced before Junos OS Release 7.4.
For CoS on ATM interfaces, specify the remote address of the connection.
For point-to-point interfaces only, specify the address of the interface at the remote end
of the connection.
For tunnel and encryption interfaces, specify the remote address of the tunnel.
—Address of the remote side of the connection.
address
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Configuring Linear RED Profiles on ATM Interfaces
Multilink and Link Services Logical Interface Configuration Overview
Configuring Encryption Interfaces
Configuring Traffic Sampling
Configuring Flow Monitoring
Configuring Unicast Tunnels
Chapter 41: Configuration Statements
1479