Juniper ACX1000 Configuration Manual page 1323

Table 104: Statement Usage and Input Rewrite Operations for VLAN Identifiers for a VLAN
VLAN Identifier of
Logical Interface
none
200
1000
vlan-tags outer 2000
inner 300
vlan-tags outer 100
inner 400
Table 105: Statement Usage and Output Rewrite Operations for VLAN Identifiers for a VLAN
VLAN Identifier of
Logical Interface
none
200
1000
vlan-tags outer 2000
inner 300
vlan-tags outer 100 inner 400
Copyright © 2017, Juniper Networks, Inc.
"No operation" means that the VLAN tags of the received packet are not translated for
the specified input logical interface.
VLAN Configurations for a VLAN
vlan-id none
No operation
pop 200
pop 1000
pop 2000, pop 300
pop 100, pop 400
Table 49 on page 758 shows specific examples of how the VLAN tags for packets sent
from the VLAN are processed and translated, depending on your configuration. "–" means
that the statement is not supported for the specified logical interface VLAN identifier.
"No operation" means that the VLAN tags of the outbound packet are not translated for
the specified output logical interface.
VLAN Configurations for a VLAN
vlan-id none
no operation
push 200
push 1000
push 2000, push 300
push 100, push 400
Chapter 35: Configuring Virtual Private LAN Service
vlan-id 200
push 200
No operation
swap 1000 to 200
pop 2000, swap 300
to 200
pop 100, swap 400
to 200
vlan-id 200
pop 200
No operation
swap 200 to 1000
swap 200 to 300,
push 2000
swap 200 to 400,
push 100
vlan tags outer 100
inner 300
push 100, push 300
swap 200 to 300,
push 100
swap 1000 to 300,
push 100
swap 2000 to 100
swap 400 to 300
vlan tags outer 100
inner 300
pop 100, pop 300
pop 100, swap 300
to 200
pop 100, swap 300
to 1000
swap 100 to 2000
swap 300 to 400
1265