Juniper ACX1000 Configuration Manual page 1390

ACX Series Universal Access Router Configuration Guide
1332
NOTE: The Test Status
cable. The value
the cable has no faults.
The following is additional information about the TDR test:
The TDR test can take some seconds to complete. If the test is still running when you
execute the
show diagnostics tdr
example:
user@host> show diagnostics tdr interface ge-0/0/22
Interface TDR detail:
Interface name
Test status
You can terminate a running TDR test before it completes by using the
diagnostics tdr abort interface interface-name
results, and the results from any previous test are cleared.
You can display summary information about the last TDR test results for all interfaces
on the router that support the TDR test by not specifying an interface name with the
command. For example:
show diagnostics tdr
user@host> show diagnostics tdr
Interface Test status
ge-0/0/0 Passed
ge-0/0/1 Not Started
ge-0/0/2 Passed
ge-0/0/3 Not Started
ge-0/0/4 Passed
ge-0/0/5 Passed
ge-0/0/6 Passed
ge-0/0/7 Not Started
ge-0/0/8 Passed
ge-0/0/9 Not Started
ge-0/0/10 Passed
ge-0/0/11 Passed
ge-0/0/12 Not Started
ge-0/0/13 Not Started
ge-0/0/14 Not Started
ge-0/0/15 Not Started
ge-0/0/16 Not Started
ge-0/0/17 Not Started
ge-0/0/18 Not Started
ge-0/0/19 Passed
ge-0/0/20 Not Started
ge-0/0/21 Not Started
ge-0/0/22 Passed
ge-0/0/23 Not Started
field indicates the status of the TDR test, not the
means the test completed—it does not mean that
Passed
command, the
Test status
: ge-0/0/22
: Started
command. The test terminates with no
Link status Cable status
UP OK
N/A N/A
UP OK
N/A N/A
UP OK
UP OK
UP OK
N/A N/A
Down OK
N/A N/A
Down Fault
UP OK
N/A N/A
N/A N/A
N/A N/A
N/A N/A
N/A N/A
N/A N/A
N/A N/A
Down OK
N/A N/A
N/A N/A
UP OK
N/A N/A
field displays
Started
request
Max distance fault
0
N/A
0
N/A
0
0
0
N/A
0
N/A
1
0
N/A
N/A
N/A
N/A
N/A
N/A
N/A
0
N/A
N/A
0
N/A
Copyright © 2017, Juniper Networks, Inc.
. For