Juniper ACX1000 Configuration Manual page 1848

ACX Series Universal Access Router Configuration Guide
Table 111: clear dhcp relay statistics Output Fields
Field Name Field Description
Number of packets discarded by the extended DHCP relay agent application due to errors. Only
Packets dropped
nonzero statistics appear in the
are 0 (zero), only the
Number of DHCP messages received.
Messages received
Messages sent Number of DHCP messages sent.
Sample Output
clear dhcp relay statistics
1790
field appears.
Total
—Total number of packets discarded by the extended DHCP relay agent application.
Total
Bad hardware address —Number of packets discarded because an invalid hardware address was
specified.
Bad opcode —Number of packets discarded because an invalid operation code was specified.
—Number of packets discarded because invalid options were specified.
Bad options
—Number of packets discarded because an invalid server address was specified.
Invalid server address
—Number of packets discarded because of a lease time violation
Lease Time Violation
—Number of packets discarded because there were no addresses available
No available addresses
for assignment.
—Number of packets discarded because they did not belong to a configured
No interface match
interface.
No routing instance match —Number of packets discarded because they did not belong to a configured
routing instance.
No valid local address —Number of packets discarded because there was no valid local address.
Packet too short —Number of packets discarded because they were too short.
—Number of packets discarded because of a system read error.
Read error
—Number of packets that the extended DHCP relay application could not send.
Send error
—Number of packets discarded containing DHCP option 60 vendor-specific information.
Option 60
Option 82 —Number of packets discarded because DHCP option 82 information could not be added.
—Number of BOOTP protocol data units (PDUs) received
BOOTREQUEST
—Number of DHCP PDUs of type DECLINE received
DHCPDECLINE
DHCPDISCOVER —Number of DHCP PDUs of type DISCOVER received
DHCPINFORM —Number of DHCP PDUs of type INFORM received
—Number of DHCP PDUs of type RELEASE received
DHCPRELEASE
—Number of DHCP PDUs of type REQUEST received
DHCPREQUEST
BOOTREPLY —Number of BOOTP PDUs transmitted
—Number of DHCP OFFER PDUs transmitted
DHCPOFFER
—Number of DHCP ACK PDUs transmitted
DHCPACK
—Number of DHCP NACK PDUs transmitted
DHCPNACK
The following sample output displays the DHCP relay statistics before and after the
command is issued.
dhcp relay statistics
output. When all of the Packets dropped statistics
Packets dropped
Copyright © 2017, Juniper Networks, Inc.
clear