Manual (Master Clock) - Juniper ACX1000 Configuration Manual

manual (Master Clock)

Syntax
Hierarchy Level
Release Information
Description
Required Privilege
Level
Related
Documentation
Copyright © 2017, Juniper Networks, Inc.
manual;
[edit protocols ptp master interface
local-ip-address local-ip-address]
Statement introduced in Junos OS Release 12.3 for ACX Series Routers.
Configure this remote clock client when it does not use unicast negotiation to join the
boundary master. When this statement is configured, the boundary master starts sending
announce and synchronization messages to the remote client.
NOTE: The number of manual clients you can configure varies depending on
the number of secure clients configured. You can configure any combination
of manual and secure clients as long as the combined total amounts to 256.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
IEEE 1588v2 PTP Boundary Clock Overview on page 234
Configuring Precision Time Protocol Clocking on page 243
Configuring a PTP Master Boundary Clock on page 244
Example: Configuring a PTP Boundary Clock With Unicast Negotiation on page 250
Example: Configuring a PTP Boundary Clock on page 248
Chapter 41: Configuration Statements
interface-name unicast-mode clock-client ip-address
1595