Managed Objects For Jnxsoampmnotificationobj Table - Juniper ACX1000 Configuration Manual

Junos os; acx series universal access router
Hide thumbs Also See for ACX1000:
Table of Contents

Advertisement

ACX Series Universal Access Router Configuration Guide
Table 100: jnxSoamDmThresholdCfgTable (continued)
Object
jnxSoamDmThresholdCfgAvgIfdvTwoW ayThreshold
jnxSoamDmThresholdCfgRowStatus

Managed Objects for jnxSoamPmNotificationObj Table

Table 101: jjnxSoamPmNotificationObj Table
Object
jnxSoamPmNotificationObjDateAndTime
jnxSoamPmNotificationObjThresholdConfig
jnxSoamPmNotificationObjThresholdValue
1226
Object ID
jnxSoamDLmThresholdCfgEntry 4
jnxSoamDmThresholdCfgEntry 5
The
jnxSoamPmNotificationObj
5}
, contains the objects listed in the following table.
Object ID
jnxSoamPmNotificationObj 1
jnxSoamPmNotificationObj 2
jnxSoamPmNotificationObj 3
jnxSoamPmNotificationObj 4
Description
Sets the average two-way IFDV threshold
value that will be used to determine if a
threshold notification is generated.
Specifies the status of the ETH-DM
threshold configuration row status. The
writable columns in a row cannot be
changed if the row is active. All columns
are to have a valid value before a row can
be activated.
table, whose object identifier is
Description
Contains the time and date at the time
that the notification event is detected,
not the time of the notification
generation. This object is used only for
notifications. The mechanism to set and
keep current the date and time is not
specified.
Denotes the object identifier of the object
that caused the generation of the
notification from the
jnxSoamLmThresholdEntry or
jnxSoamDmThresholdEntry. This object
is only used for the notification.
Denotes the configured threshold value
of the object that caused the generation
of the notification. This object is only used
for the notification.
Denotes the measured value of the object
at the time of the generation of the
Notification, from the
jnxSoamLmMeasuredStatsTable,
jnxSoamLmCurrentStatsTable,
jnxSoamDmMeasuredStatsTable or
jnxSoamDmCurrentStatsTable. This
object is only used for the notification.
Copyright © 2017, Juniper Networks, Inc.
{jnxSoamPmMibObjects

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Acx5048Acx5096Acx500Acx1100Acx2000Acx2100 ... Show all

Table of Contents