Options (Routing Options) - Juniper ACX1000 Configuration Manual

options (Routing Options)

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
Copyright © 2017, Juniper Networks, Inc.
options {
syslog (level level | upto level level);
}
[edit logical-systems logical-system-name routing-instances routing-instance-name
routing-options],
[edit logical-systems logical-system-name routing-options],
[edit routing-instances routing-instance-name routing-options],
[edit routing-options]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Statement introduced in Junos OS Release 11.3 for the QFX Series.
Statement introduced in Junos OS Release 12.3 for ACX Series routers.
Statement introduced in Junos OS Release 14.1X53-D20 for the OCX Series.
Configure the types of system logging messages sent about the routing protocols process
to the system message logging file. These messages are also displayed on the system
console. You can log messages at a particular level, or up to and including a particular
level.
—Severity of the message. It can be one or more of the following levels, in order
level level
of decreasing urgency:
—Conditions that should be corrected immediately, such as a corrupted system
alert
database.
—Critical conditions, such as hard drive errors.
critical
—Software debugging messages.
debug
—Panic or other conditions that cause the system to become unusable.
emergency
—Standard error conditions.
error
—Informational messages.
info
notice —Conditions that are not error conditions, but might warrant special handling.
—System warning messages.
warning
—Log all messages up to a particular level.
upto level level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
in the Junos OS Administration Library
syslog
Chapter 41: Configuration Statements
1645