Juniper ACX1000 Configuration Manual page 1891

Table 116: show bgp summary Output Fields (continued)
Field Name Field Description
Multipurpose field that displays information about BGP peer sessions. The field's contents depend
State|#Active
upon whether a session is established and whether it was established on the main routing device or
/Received/Accepted
in a routing instance.
/Damped
NOTE:
the
shows the number of active, received, accepted, and damped routes that are received from a neighbor
and appear in the inet.0 (main) and inet.2 (multicast) routing tables. For example, 8/10/10/2 and
2/4/4/0 indicate the following:
Copyright © 2017, Juniper Networks, Inc.
If a peer is not established, the field shows the state of the peer session:
In general, the Idle state is the first stage of a connection. BGP is waiting for a Start event. A session
can be idle for other reasons as well. The reason that a session is idle is sometimes displayed. For
example:
Idle (Removal in progress)
If a BGP session is established on the main routing device, the field shows the number of active,
received, accepted, and damped routes that are received from a neighbor and appear in the
(main) and (multicast) routing tables. For example,
inet.2
following:
8 active routes, 10 received routes, 10 accepted routes, and 2 damped routes from a BGP peer
appear in the routing table.
inet.0
2 active routes, 4 received routes, 4 accepted routes, and no damped routes from a BGP peer
appear in the inet.2 routing table.
If a BGP session is established in a routing instance, the field indicates the established
state, identifies the specific routing table that receives BGP updates, and shows the number of
active, received, and damped routes that are received from a neighbor. For example,
VPN-AB.inet.0: 2/4/0 indicates the following:
The BGP session is established.
Routes are received in the VPN-AB.inet.0
The local routing device has two active routes, four received routes, and no damped routes from
a BGP peer.
When a BGP session is established, the peers are exchanging update messages.
When graceful restart or LLGR helper mode is active, the RIB information is now displayed by
command. If a BGP session is established on the main routing device, the field
show bgp summary
8 active routes, 10 received routes, 10 accepted routes, and 2 damped routes from a BGP peer
appear in the inet.0 routing table.
2 active routes, 4 received routes, 4 accepted routes, and no damped routes from a BGP peer
appear in the inet.2 routing table.
Chapter 42: Operational Commands
or .
Idle (LicenseFailure)
8/10/10/2 and 2/4/4/0
routing table.
, , or .
Active Connect Idle
inet.0
indicate the
(Establ)
Establ
1833