Juniper ACX1000 Configuration Manual page 1350

Junos os; acx series universal access router
Hide thumbs Also See for ACX1000:
Table of Contents

Advertisement

ACX Series Universal Access Router Configuration Guide
Instance: H-VPLS
BGP-VPLS State
Local site: pe3 (3)
connection-site
4
Remote PE: 192.0.2.4, Negotiated control-word: No
Incoming label: 800267, Outgoing label: 800266
Local interface: vt-2/0/9.135266562, Status: Up, Encapsulation: VPLS
Description: Intf - vpls H-VPLS local site 3 remote site 4
LDP-VPLS State
Mesh-group connections: pe1
Neighbor
192.0.2.1(vpls-id 100)
Remote PE: 192.0.2.1, Negotiated control-word: No
Incoming label: 800001, Outgoing label: 299840
Negotiated PW status TLV: No
Local interface: vt-2/0/10.135266560, Status: Up, Encapsulation: ETHERNET
Description: Intf - vpls H-VPLS neighbor 192.0.2.1 vpls-id 100
Mesh-group connections: pe2
Neighbor
192.0.2.2(vpls-id 200)
Remote PE: 192.0.2.2, Negotiated control-word: No
Incoming label: 800002, Outgoing label: 299872
Negotiated PW status TLV: No
Local interface: vt-2/0/8.135266561, Status: Up, Encapsulation: ETHERNET
Description: Intf - vpls H-VPLS neighbor 192.0.2.2 vpls-id 200
user@PE4> show vpls connections
Layer-2 VPN connections:
Legend for connection status (St)
EI -- encapsulation invalid
EM -- encapsulation mismatch
VC-Dn -- Virtual circuit down
CM -- control-word mismatch
CN -- circuit not provisioned
OR -- out of range
OL -- no outgoing label
LD -- local site signaled down
RD -- remote site signaled down
LN -- local site not designated
RN -- remote site not designated RM -- remote site ID not minimum designated
XX -- unknown connection status
MM -- MTU mismatch
BK -- Backup connection
PF -- Profile parse failure
RS -- remote site standby
LB -- Local site not best-site
VM -- VLAN ID mismatch
Legend for interface status
Up -- operational
Dn -- down
Instance: H-VPLS
BGP-VPLS State
Local site: pe4 (4)
connection-site
3
Remote PE: 192.0.2.3, Negotiated control-word: No
1292
Type
St
Time last up
rmt
Up
Oct 18 15:58:39 2012
Type
St
Time last up
rmt
Up
Oct 18 15:55:07 2012
Type
St
Time last up
rmt
Up
Oct 18 15:55:07 2012
NC -- interface encapsulation not CCC/TCC/VPLS
WE -- interface and instance encaps not same
NP -- interface hardware not present
-> -- only outbound connection is up
<- -- only inbound connection is up
Up -- operational
Dn -- down
CF -- call admission control failure
SC -- local and remote site ID collision
LM -- local site ID not minimum designated
IL -- no incoming label
MI -- Mesh-Group ID not available
ST -- Standby connection
PB -- Profile busy
SN -- Static Neighbor
RB -- Remote site not best-site
Type
St
Time last up
rmt
Up
Oct 18 15:58:39 2012
# Up trans
1
# Up trans
1
# Up trans
1
# Up trans
1
Copyright © 2017, Juniper Networks, Inc.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Acx5048Acx5096Acx500Acx1100Acx2000Acx2100 ... Show all

Table of Contents