Juniper ACX1000 Configuration Manual page 1380

ACX Series Universal Access Router Configuration Guide
Meaning
Purpose
Action
Meaning
Purpose
1322
LB -- Local site not best-site
VM -- VLAN ID mismatch
Legend for interface status
Up -- operational
Dn -- down
Instance: customer
VPLS-id: 601
Neighbor
10.255.14.217(vpls-id 601) rmt
Remote PE: 10.255.14.217, Negotiated control-word: No
Incoming label: 800001, Outgoing label: 299920
Negotiated PW status TLV: No
Local interface: vt-2/0/10.68157698, Status: Up, Encapsulation: VLAN
Description: Intf - vpls customer neighbor 10.255.14.217 vpls-id 601
As expected, the VPLS connections are operational on both PE-r devices.
Checking Connectivity
Verify that Device CE1 can ping Device CE3.
user@CE1> ping 10.255.14.218
PING 10.255.14.218 (10.255.14.218): 56 data bytes
64 bytes from 10.255.14.218: icmp_seq=0 ttl=64 time=0.858 ms
64 bytes from 10.255.14.218: icmp_seq=1 ttl=64 time=0.527 ms
64 bytes from 10.255.14.218: icmp_seq=2 ttl=64 time=0.670 ms
^C
--- 10.255.14.218 ping statistics ---
3 packets transmitted, 3 packets received, 0% packet loss
round-trip min/avg/max/stddev = 0.527/0.685/0.858/0.136 ms
The output shows that H-VPLS is operational.
Manually Triggering a Switch from the Active Pseudowire to the Redundant
Pseudowire
Make sure that the pseudowire between Device PE1 and Device PE2 becomes operational.
RB -- Remote site not best-site
Type St Time last up
Up Oct 9 16:29:02 2012
Copyright © 2017, Juniper Networks, Inc.
# Up trans
1