Juniper ACX1000 Configuration Manual page 1264

ACX Series Universal Access Router Configuration Guide
Table 96: jnxSoamDmMeasuredStatsTable
Object
jnxSoamDmMeasuredStatsFrameDelayTwoWay
jnxSoamDmMeasuredStatsFrameDelayForward
jnxSoamDmMeasuredStatsFrameDelayBackward
jnxSoamDmMeasuredStatsIfdvTwoWay
jnxSoamDmMeasuredStatsIfdvForward
1206
The
jnxSoamDmMeasuredStatsTable
Delay Measurement session. Each row in the table represents a Delay Measurement
session for the defined MEP. This table uses four indices. The first three indices are the
indices of the Maintenance Domain, MaNet, and MEP tables. The fourth index is the
specific DM session on the selected MEP. Instances of this managed object are created
automatically by the SNMP Agent when the Delay Measurement session is running. Each
object in this table applies only if the corresponding bit is set in
jnxSoamDmCfgMeasurementEnable. The objects in this table do not need to be persistent
upon reboot or restart of a device.
Object ID
jnxSoamDmMeasuredStatsEntry
1
jnxSoamDmMeasuredStatsEntry
2
jnxSoamDmMeasuredStatsEntry
3
jnxSoamDmMeasuredStatsEntry
4
jnxSoamDmMeasuredStatsEntry
5
contains the last measured results for a SOAM
Description
Contains the two-way frame delay
calculated by this MEP from the last
received SOAM PDU. This object is
undefined is jnxSoamDmCfgType is
dm1DmTx or dm1DmRx.
Contains the frame delay in the forward
direction calculated by this MEP from
the last received SOAM PDU. The value
of this object may not be accurate in the
absence of sufficiently precise clock
synchronization. This object is
undefined is jnxSoamDmCfgType is
dm1DmTx.
Contains the frame delay in the
backward direction calculated by this
MEP from the last received SOAM PDU.
The value of this object may not be
accurate in the absence of sufficiently
precise clock synchronization. This
object is undefined is
jnxSoamDmCfgType is dm1DmTx or
dm1DmRx.
Contains the last two-way inter-frame
delay interval calculated by this MEP.
The value of this object is undefined
when jnxSoamDmCfgType is dm1DmTx
or dm1DmRx.
Contains the last one-way inter-frame
delay interval in the forward direction
calculated by this MEP. The value of this
object is undefined when
jnxSoamDmCfgType is dm1DmTx.
Copyright © 2017, Juniper Networks, Inc.