Required Privilege
Level
Related
Documentation
Copyright © 2017, Juniper Networks, Inc.
—Specify global aggregate route options. These options only set default attributes
defaults
inherited by all newly created aggregate routes. These are treated as global defaults
and apply to all the aggregate routes you configure in the
part of the
aggregate
statement is optional.
—Configure a nondefault aggregate route:
route destination-prefix
default
—For the default route to the destination. This is equivalent to specifying an IP
address of
.
0.0.0.0/0
destination-prefix/prefix-length
address, and
prefix-length
The
statement is explained separately.
policy
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Example: Summarizing Static Routes Through Route Aggregation
—
destination-prefix
is the network portion of the IP
is the destination prefix length.
Chapter 41: Configuration Statements
statement. This
aggregate
1421