Bpdu-Block-On-Edge - Juniper ACX1000 Configuration Manual

bpdu-block-on-edge

Syntax
Hierarchy Level
Release Information
Description
Required Privilege
Level
Related
Documentation
Copyright © 2017, Juniper Networks, Inc.
bpdu-block-on-edge;
[edit logical-systems logical-system-name protocols (mstp | rstp | vstp)],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
(mstp | rstp | vstp)],
[edit protocols ( mstp | rstp| vstp )],
[edit routing-instances routing-instance-name protocols (mstp | rstp | vstp)]
Statement introduced in Junos OS Release 9.4.
Support for logical systems added in Junos OS Release 9.6.
Statement introduced in Junos OS Release 17.1 for ACX Series routers.
Enable BPDU blocking on the edge ports of a virtual switch.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Understanding BPDU Protection for Spanning-Tree Instance Interfaces on page 423
BPDU Protection on All Edge Ports of the Bridge
Configuring BPDU Protection on All Edge Ports on page 425
Configuring BPDU Protection on Spanning Tree Interfaces
rstp
mstp
vstp
Chapter 41: Configuration Statements
1451