Configuring Flow Mirroring On Acx5000 Series Routers; Configuring The Family As Ethernet-Switching And Specifying The Output; As Layer 2 Logical Interface - Juniper ACX1000 Configuration Manual

ACX Series Universal Access Router Configuration Guide

Configuring Flow Mirroring on ACX5000 Series Routers

1392
vlan vlan-name; {
no-tag;
}
}
}
}
NOTE: In this method, the mirrored packet do not have any VLAN tags
associated with the packets.
In the flow mirroring mode, input parameters for mirroring are specified through a firewall
filter. You need to include the
hierarchy level. The ACX5000 line of routers supports only family
family inet configurations.
The following are the various methods to configure flow mirroring on ACX5000 line of
routers:
Configuring the Family as ethernet-switching and Specifying the Output as Layer 2
Logical Interface on page 1392
Configuring the Family as ethernet-switching and Specifying the Output as
VLAN. on page 1393
Configuring the Output as VLAN with the no-tag Option on page 1394
Configuring the Family as inet and Specifying the Output as Next-Hop IP
Address on page 1395
Configuring the Family as ethernet-switching and Specifying the Output as Layer
2 Logical Interface
You can configure flow mirroring on the ACX5000 line of routers by configuring the family
as and specifying the output as a Layer 2 logical interface as shown
ethernet-switching
in the following configuration:
Configure the output as logical interface.
1.
[edit forwarding-options]
port-mirroring {
family ethernet-switching {
output {
interface logical-interface-name;
}
}
}
Configure the firewall filter and specify the action as mirror.
2.
[edit firewall]
family ethernet-switching {
filter filter-name {
CLI statement at the [
port-mirroring edit forwarding-options
ethernet-switching
Copyright © 2017, Juniper Networks, Inc.
]
and