Framing (E1 Options For Bits Interfaces) - Juniper ACX1000 Configuration Manual

framing (E1 Options for BITS Interfaces)

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
Copyright © 2017, Juniper Networks, Inc.
framing (g704 | g704-no-cro4);
[edit chassis synchronization interfaces bits signal-type
Statement introduced in Junos OS Release 12.3 for ACX Series Routers.
Configure the framing format for the building-integrated timing supply (BITS) interface
when the signal type is E1. Valid only when
chassis synchronization source interfaces interface-name bits signal-type
—G.704 framing format for E1 interfaces.
g704
g704-no-crc4 —G.704 framing with no cyclic redundancy check 4 (CRC4) for E1 interfaces.
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
External Clock Synchronization Overview for ACX Series Routers on page 226
Configuring External Clock Synchronization for ACX Series Routers on page 228
Synchronous Ethernet Overview
show chassis synchronization on page 2386
Chapter 41: Configuration Statements
e1-options]
e1 is the signal-type configured at the [ edit
].
1533