Announce-Interval (Slave Clock) - Juniper ACX1000 Configuration Manual

announce-interval (Slave Clock)

Syntax
Hierarchy Level
Description
Options
Required Privilege
Level
Related
Documentation
Copyright © 2017, Juniper Networks, Inc.
announce-interval announce-interval-value
[edit protocols ptp slave]
Specify the rate of announce messages that a Precision Time Protocol (PTP) slave
requests from the master during a unicast-negotiation session. The announce interval
is configured on the slave.
NOTE: The configuration of the
when the
unicast-negotiation
protocols ptp ] hierarchy level.
—Announce interval value for the announce messages.
announce-interval-value
Range: 0 through 3
Default: 1
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
IEEE 1588v2 Precision Timing Protocol (PTP) on ACX Series Universal Access Routers
on page 237
Precision Time Protocol Overview
Chapter 41: Configuration Statements
statement is effective only
announce-interval
statement is also configured at the [
edit
1429