Peak-Rate - Juniper ACX1000 Configuration Manual

peak-rate

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
Copyright © 2017, Juniper Networks, Inc.
peak-rate peak-rate;
[edit class-of-service traffic-control-profiles
[edit firewall atm-policer atm-policer-name]
Statement introduced in Junos OS Release 12.3 for ACX Series routers.
(ACX Series routers) Define the top rate at which traffic can burst. The ATM peak cell
rate on ATM IMA pseudowire interfaces is in cells per second expressed as a decimal
number in which 1 cps = 384 bps. The maximum number of cells at the peak rate is
determined by the bandwidth available on the interface.
peak-rate—ATM peak rate in cells per second.
Range: 61 cps through 38,641 cps
firewall—To view this statement in the configuration.
firewall-control—To add this statement to the configuration.
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Understanding CoS on ATM IMA Pseudowire Interfaces Overview on page 895
Configuring Policing on an ATM IMA Pseudowire on page 912
Configuring Shaping on an ATM IMA Pseudowire on page 901
show class-of-service traffic-control-profile
Chapter 41: Configuration Statements
traffic-control-profile-name],
1661