Route-Distinguisher-Id - Juniper ACX1000 Configuration Manual

route-distinguisher-id

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
Copyright © 2017, Juniper Networks, Inc.
route-distinguisher-id ip-address;
[edit logical-systems logical-system-name routing-options],
[edit routing-options]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Automatically assign a route distinguisher to the routing instance.
If you configure the
route-distinguisher
statement, the value configured for
from
route-distinguisher-id
NOTE: To avoid a conflict in the two route distinguisher values, it is
recommended to ensure that the first half of the route distinguisher obtained
by configuring the
of the route distinguisher obtained by configuring the
statement.
—Address for routing instance.
ip-address
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Example: Configuring BGP Route Target Filtering for VPNs
Configuring Routing Instances on PE Routers in VPNs
statement in addition to the
route-distinguisher
.
statement is different from the first half
route-distinguisher
Chapter 41: Configuration Statements
route-distinguisher-id
supersedes the value generated
route-distinguisher-id
1703